Hydraulic Jump In Non-Rectangular Channels: Trapezoidal & Triangular Sections (2026)
- 1. Hydraulic Complexity of Non-Rectangular Open Channels
- 2. Governing Specific Force and Nonlinear Momentum Formulations
- 3. Exact and Iterative Formulations for Trapezoidal Sections
- 4. Exact Closed-Form Solutions for Triangular and Parabolic Geometries
- 5. Flow Asymmetry, Lateral Vortices, and Cross-Wave Instabilities
- 6. Solved Numerical Example 1: Hydraulic Jump in a Trapezoidal Canal
- 7. Solved Numerical Example 2: Exact Closed-Form Solution in a Triangular Flume
- 8. Solved Numerical Example 3: Parabolic Drainage Channel Energy Dissipation
- 9. Channel Armoring, Riprap Sizing, and Sidewall Protection Standards
- 10. Non-Rectangular Jump Engineering Synthesis
- References & Standards Cited
1. Hydraulic Complexity of Non-Rectangular Open Channels
In water resources engineering, irrigation canal networks, stormwater conveyances, and highway drainage channels are predominantly constructed with trapezoidal, triangular, circular, or parabolic cross-sections. While rectangular flumes exhibit uniform top width across all depths, non-rectangular conduits exhibit variable cross-sectional area $A(y)$, top width $T(y)$, and centroidal depth $\bar{z}(y)$ that vary nonlinearly with flow stage. Analyzing a hydraulic jump in non rectangular channels requires fundamental modifications to classical rectangular momentum theory.
NON-RECTANGULAR CHANNEL CROSS-SECTIONS
Trapezoidal Section Triangular Section
<--- T(y) ---> <--- T(y) --->
/ \ \ /
m/ y \m m \ y / m
+------------------+ \ /
|<------- b ------>| +--------+
When supercritical flow transitions to subcritical discharge in a trapezoidal or triangular canal, the lateral expansion of the cross-section alters the internal pressure distribution and turbulence structure. The resulting jump roller is three-dimensional, exhibiting intense transverse velocity gradients, asymmetric side-wall eddies, and diamond cross-waves that do not occur in straight rectangular basins.
Fundamental Principles and Physics of Open Channel Hydraulic Jumps
Hydraulic engineers must accurately evaluate conjugate depth ratios, roller lengths, and energy loss percentages in these geometries to size canal linings, design stable transition structures, and prevent embankment erosion.
2. Governing Specific Force and Nonlinear Momentum Formulations
The basic physical principle governing a hydraulic jump in any prismatic open channel is the conservation of linear momentum. Neglecting boundary friction and channel bed slope over the short length of the jump, the specific force $M$ (or momentum function) remains strictly constant between the supercritical upstream Section 1 and the subcritical downstream Section 2.
MOMENTUM BALANCE ACROSS JUMP
Section 1 (Supercritical: A1, z1_bar, V1) ===> Section 2 (Subcritical: A2, z2_bar, V2)
Specific Force M1 ===EQUALS===> Specific Force M2
[ Q^2 / (g*A1) + A1*z1_bar ] ============= [ Q^2 / (g*A2) + A2*z2_bar ]
The universal specific force equation is formulated as:
$$M = \frac{Q^2}{g A(y)} + A(y) \bar{z}(y) = \text{ constant}$$
Where:
-
$Q$ is constant volume discharge ($\text{ m}^3/\text{ s}$).
-
$g$ is gravitational acceleration ($9.81\text{ m/s}^2$).
-
$A(y)$ is wetted cross-sectional area as a function of depth $y$ ($\text{ m}^2$).
-
$\bar{z}(y)$ is vertical distance from the water surface down to the centroid of the wetted area ($\text{ m}$).
-
$A(y) \bar{z}(y)$ represents the first moment of area about the free surface, which governs total hydrostatic pressure thrust: $P_{hyd} = \gamma A \bar{z}$.
Equating specific force across the jump:
$$\frac{Q^2}{g A_1} + A_1 \bar{z}_1 = \frac{Q^2}{g A_2} + A_2 \bar{z}_2$$
The incoming Froude number for any arbitrary cross-section is defined using hydraulic depth $D = A / T$:
$$F = \frac{V}{\sqrt{g D}} = \frac{Q / A}{\sqrt{g A / T}} = \sqrt{\frac{Q^2 T}{g A^3}}$$
In a hydraulic jump in non rectangular channels, the nonlinearity of $A(y)$ and $\bar{z}(y)$ eliminates direct algebraic simplifications such as the Belanger equation, requiring iterative root-finding techniques or specialized geometric closed-form solutions.
Specific Energy and Specific Force Curves in Non-Prismatic Channels
3. Exact and Iterative Formulations for Trapezoidal Sections
For a trapezoidal cross-section with bottom width $b$, side slope $m$ (horizontal to 1 vertical, $m\text{ H}:1\text{ V}$), and water depth $y$:
TRAPEZOIDAL SECTION GEOMETRIC PROPERTIES
Top Width: T(y) = b + 2 m y
Wetted Area: A(y) = (b + m y) y
First Moment: A(y) * z_bar(y) = (b / 2 + m y / 3) y^2
The hydrostatic pressure force term is derived by integrating horizontal strip elements:
$$A \bar{z} = \int_0^y (y – \eta) (b + 2 m \eta) d\eta = \left( \frac{b}{2} + \frac{m y}{3} ight) y^2$$
Substituting these expressions into the specific force balance yields the fundamental governing equation for a trapezoidal hydraulic jump:
$$\frac{Q^2}{g (b + m y_1) y_1} + \left( \frac{b}{2} + \frac{m y_1}{3} ight) y_1^2 = \frac{Q^2}{g (b + m y_2) y_2} + \left( \frac{b}{2} + \frac{m y_2}{3} ight) y_2^2$$
Defining the dimensionless parameters $Y = \frac{y_2}{y_1}$ (conjugate depth ratio) and $t = \frac{m y_1}{b}$ (channel shape factor), the momentum equation can be non-dimensionalized into a 5th-degree polynomial:
$$Y^5 + \left( \frac{5t + 3}{2t} ight) Y^4 + \dots = f(F_1, t)$$
Because closed-form radical solutions do not exist for general quintic polynomials, practicing engineers solve for $y_2$ using Newton-Raphson iteration:
$$y_{2,new} = y_{2,old} – \frac{M(y_{2,old}) – M_1}{M'(y_{2,old})}$$
Where the derivative with respect to depth is:
$$M'(y) = A(y) – \frac{Q^2 T(y)}{g A(y)^2} = A(y) \left( 1 – F(y)^2 ight)$$
4. Exact Closed-Form Solutions for Triangular and Parabolic Geometries
Unlike trapezoidal sections, certain non-rectangular channels possess geometric symmetry that permits exact closed-form algebraic solutions.
TRIANGULAR FLUME MOMENTUM BALANCE
Top Width: T(y) = 2 m y
Area: A(y) = m y^2
Centroid: z_bar(y) = y / 3
First Moment: A * z_bar = (m / 3) y^3
Exact Solution for Triangular Channels:
For a triangular cross-section with side slope $m\text{ H}:1\text{ V}$:
$$M(y) = \frac{Q^2}{g m y^2} + \frac{m}{3} y^3$$
Equating specific force $M(y_1) = M(y_2)$:
$$\frac{Q^2}{g m} \left( \frac{1}{y_1^2} – \frac{1}{y_2^2} ight) = \frac{m}{3} (y_2^3 – y_1^3)$$
Noting that incoming Froude number is $F_1^2 = \frac{Q^2 T_1}{g A_1^3} = \frac{Q^2 (2 m y_1)}{g (m y_1^2)^3} = \frac{2 Q^2}{g m^2 y_1^5}$, setting $Y = y_2 / y_1$:
$$\frac{F_1^2}{2} \left( \frac{Y^2 – 1}{Y^2} ight) = \frac{1}{3} (Y^3 – 1)$$
Factoring out $(Y – 1)$ yields the exact quadratic equation in $Y$:
$$Y^4 + Y^3 + Y^2 – \frac{3}{2} F_1^2 (Y + 1) = 0$$
Silvester established an exact empirical representation for triangular conjugate depths:
$$Y = \frac{y_2}{y_1} \approx \frac{1}{2} \left( \sqrt{1 + 6 F_1^2} – 1 ight)$$
Parabolic Channels ($z = c x^2$):
For parabolic channels of area $A = \frac{2}{3} T y$ and top width $T = a y^{1/2}$, the exact conjugate depth ratio closely tracks:
$$Y = \frac{y_2}{y_1} \approx \frac{1}{2} \left( \sqrt{1 + 6.4 F_1^2} – 1 ight)$$
5. Flow Asymmetry, Lateral Vortices, and Cross-Wave Instabilities
A major operational hazard of a hydraulic jump in non rectangular channels is spatial instability. In trapezoidal canals with side slopes flatter than $1.5\text{ H}:1\text{ V}$, the high-velocity central supercritical jet cannot expand fast enough to fill the widening subcritical cross-section.
FLOW ASYMMETRY AND SIDE EDDIES IN TRAPEZOIDAL CHANNELS
/============================== / <--- Return Current --- \ <-- Recirculation Eddy
Supercritical /-------- Central High-Speed Jet -- Inflow ====> | ================================== | ===> Subcritical Exit
\-------- Central High-Speed Jet --/
\ <--- Return Current --- / <-- Scour Hazard
\==============================/
Physical Manifestations of Instability:
- Wall Separation & Recirculating Eddies: The jet separates from one or both side walls, creating massive horizontal reverse rollers that draw sediment and riprap into the basin.
- Diamond Cross-Waves: Deflected surface waves bounce between sloping banks, generating diamond-patterned standing shock waves that propagate kilometers downstream.
- Severe Local Scour: High-velocity bottom filaments concentrate along one side of the channel, eroding protective clay blankets and destabilizing embankment slopes.
Engineering Remedies:
-
Construct vertical transition training walls through the jump zone ($L_{wall} \approx 5 y_2$).
-
Install longitudinal baffle splitters or floor sills to force symmetrical transverse diffusion.
-
Flare side slopes gradually ($1\text{ V}:4\text{ H}$ lateral transition rate).
6. Solved Numerical Example 1: Hydraulic Jump in a Trapezoidal Canal
A trapezoidal irrigation canal has a bottom width $b = 4.00\text{ m}$ and side slopes $m = 1.50\text{ H}:1\text{ V}$. The canal conveys a discharge $Q = 24.0\text{ m}^3\text{/s}$. Supercritical flow arrives at the jump toe with depth $y_1 = 0.50\text{ m}$.
Calculate the incoming Froude number $F_1$, solve for the subcritical conjugate depth $y_2$ using specific force equilibrium, calculate the energy head loss $\Delta E$, and determine dissipation efficiency $\eta$.
CANAL INPUT DATA:
Q = 24.0 m3/s, b = 4.00 m, m = 1.50, y1 = 0.50 m, g = 9.81 m/s2
Step 1: Upstream Geometric and Hydraulic Properties at Section 1
Top width $T_1$:
$$T_1 = b + 2 m y_1 = 4.00 + 2(1.50)(0.50) = 4.00 + 1.50 = 5.50\text{ m}$$
Cross-sectional area $A_1$:
$$A_1 = (b + m y_1) y_1 = (4.00 + 1.50 \times 0.50) \times 0.50 = (4.00 + 0.75) \times 0.50 = 4.75 \times 0.50 = 2.375\text{ m}^2$$
Hydraulic depth $D_1$:
$$D_1 = \frac{A_1}{T_1} = \frac{2.375}{5.50} = 0.4318\text{ m}$$
Flow velocity $V_1$:
$$V_1 = \frac{Q}{A_1} = \frac{24.00}{2.375} = 10.105\text{ m/s}$$
Incoming Froude number $F_1$:
$$F_1 = \frac{V_1}{\sqrt{g D_1}} = \frac{10.105}{\sqrt{9.81 \times 0.4318}} = \frac{10.105}{\sqrt{4.236}} = \frac{10.105}{2.058} = 4.910 \quad (\text{ Supercritical})$$
First moment of area $A_1 \bar{z}_1$:
$$A_1 \bar{z}_1 = \left( \frac{b}{2} + \frac{m y_1}{3} ight) y_1^2 = \left( \frac{4.00}{2} + \frac{1.50 \times 0.50}{3} ight) (0.50)^2 = (2.00 + 0.25) \times 0.25 = 2.25 \times 0.25 = 0.5625\text{ m}^3$$
Upstream Specific Force $M_1$:
$$M_1 = \frac{Q^2}{g A_1} + A_1 \bar{z}_1 = \frac{(24.00)^2}{9.81 \times 2.375} + 0.5625 = \frac{576.0}{23.2988} + 0.5625 = 24.7223 + 0.5625 = 25.2848\text{ m}^3$$
Step 2: Iterative Solution for Conjugate Depth $y_2$
We must find $y_2$ such that $M(y_2) = 25.2848\text{ m}^3$.
Trial 1 ($y_2 = 2.00\text{ m}$):
-
$A_2 = (4.00 + 1.5 \times 2.0)(2.0) = (7.0)(2.0) = 14.00\text{ m}^2$
-
$A_2 \bar{z}_2 = (2.00 + \frac{1.5 \times 2.0}{3})(2.0)^2 = (2.00 + 1.00)(4.0) = 12.00\text{ m}^3$
-
$M(2.00) = \frac{576.0}{9.81 \times 14.00} + 12.00 = \frac{576.0}{137.34} + 12.00 = 4.194 + 12.00 = 16.194\text{ m}^3 < 25.285$ (Too low)
Trial 2 ($y_2 = 2.50\text{ m}$):
-
$A_2 = (4.00 + 1.5 \times 2.5)(2.5) = (7.75)(2.5) = 19.375\text{ m}^2$
-
$A_2 \bar{z}_2 = (2.00 + \frac{3.75}{3})(6.25) = (2.00 + 1.25)(6.25) = 3.25 \times 6.25 = 20.3125\text{ m}^3$
-
$M(2.50) = \frac{576.0}{9.81 \times 19.375} + 20.3125 = \frac{576.0}{190.069} + 20.3125 = 3.0305 + 20.3125 = 23.343\text{ m}^3 < 25.285$
Trial 3 ($y_2 = 2.65\text{ m}$):
-
$A_2 = (4.00 + 1.5 \times 2.65)(2.65) = (7.975)(2.65) = 21.134\text{ m}^2$
-
$A_2 \bar{z}_2 = (2.00 + \frac{3.975}{3})(7.0225) = (2.00 + 1.325)(7.0225) = 3.325 \times 7.0225 = 23.350\text{ m}^3$
-
$M(2.65) = \frac{576.0}{9.81 \times 21.134} + 23.350 = 2.778 + 23.350 = 26.128\text{ m}^3 > 25.285$
Interpolating precisely: $y_2 = 2.607\text{ m}$.
Check at $y_2 = 2.607\text{ m}$:
-
$A_2 = (4.00 + 1.5 \times 2.607)(2.607) = (7.9105)(2.607) = 20.623\text{ m}^2$
-
$A_2 \bar{z}_2 = (2.00 + 1.3035)(6.7964) = 3.3035 \times 6.7964 = 22.452\text{ m}^3$
-
$M_2 = \frac{576.0}{9.81 \times 20.623} + 22.452 = 2.847 + 22.452 = 25.299\text{ m}^3 \approx 25.285\text{ m}^3$ (Matched).
Conjugate depth ratio: $Y = \frac{y_2}{y_1} = \frac{2.607}{0.50} = 5.214$.
Step 3: Energy Head Loss and Efficiency
Upstream Specific Energy $E_1$:
$$E_1 = y_1 + \frac{V_1^2}{2g} = 0.50 + \frac{(10.105)^2}{2 \times 9.81} = 0.50 + \frac{102.11}{19.62} = 0.50 + 5.204 = 5.704\text{ m}$$
Downstream velocity $V_2$:
$$V_2 = \frac{Q}{A_2} = \frac{24.00}{20.623} = 1.164\text{ m/s}$$
Downstream Specific Energy $E_2$:
$$E_2 = y_2 + \frac{V_2^2}{2g} = 2.607 + \frac{(1.164)^2}{19.62} = 2.607 + \frac{1.355}{19.62} = 2.607 + 0.069 = 2.676\text{ m}$$
Energy Loss ($\Delta E$):
$$\Delta E = E_1 – E_2 = 5.704 – 2.676 = 3.028\text{ m}$$
Energy Dissipation Efficiency ($\eta$):
$$\eta = \frac{\Delta E}{E_1} = \frac{3.028}{5.704} = 0.5309 = 53.09\%$$
7. Solved Numerical Example 2: Exact Closed-Form Solution in a Triangular Flume
A triangular flume with symmetrical side slopes $m = 2.00\text{ H}:1\text{ V}$ conveys a discharge $Q = 6.00\text{ m}^3\text{/s}$. Supercritical depth before the jump is $y_1 = 0.60\text{ m}$. Calculate the incoming Froude number $F_1$, exact conjugate subcritical depth $y_2$, and energy head loss $\Delta E$.
TRIANGULAR FLUME PARAMETERS:
Q = 6.00 m3/s, m = 2.00, y1 = 0.60 m, g = 9.81 m/s2
Step 1: Upstream Hydraulic Parameters
Cross-sectional area $A_1 = m y_1^2 = 2.00 \times (0.60)^2 = 2.00 \times 0.36 = 0.720\text{ m}^2$.
Top width $T_1 = 2 m y_1 = 2 \times 2.00 \times 0.60 = 2.40\text{ m}$.
Hydraulic depth $D_1 = \frac{A_1}{T_1} = \frac{0.720}{2.40} = 0.300\text{ m}$.
Velocity $V_1 = \frac{Q}{A_1} = \frac{6.00}{0.720} = 8.333\text{ m/s}$.
Incoming Froude number $F_1$:
$$F_1 = \frac{V_1}{\sqrt{g D_1}} = \frac{8.333}{\sqrt{9.81 \times 0.300}} = \frac{8.333}{\sqrt{2.943}} = \frac{8.333}{1.7155} = 4.857$$
Step 2: Conjugate Depth Calculation ($y_2$)
Applying the exact triangular conjugate depth formulation:
$$Y = \frac{y_2}{y_1} = \frac{1}{2} \left( \sqrt{1 + 6 F_1^2} – 1 ight) = \frac{1}{2} \left( \sqrt{1 + 6(4.857)^2} – 1 ight) = \frac{1}{2} \left( \sqrt{1 + 6(23.590)} – 1 ight) = \frac{1}{2} (\sqrt{1 + 141.54} – 1) = \frac{1}{2} (11.939 – 1) = 5.4695$$
Subcritical conjugate depth $y_2$:
$$y_2 = Y \times y_1 = 5.4695 \times 0.60\text{ m} = 3.282\text{ m}$$
Step 3: Specific Energy and Loss
Upstream Specific Energy $E_1$:
$$E_1 = y_1 + \frac{V_1^2}{2g} = 0.60 + \frac{(8.333)^2}{19.62} = 0.60 + \frac{69.44}{19.62} = 0.60 + 3.539 = 4.139\text{ m}$$
Downstream Area $A_2 = m y_2^2 = 2.00 \times (3.282)^2 = 2.00 \times 10.7715 = 21.543\text{ m}^2$.
Downstream Velocity $V_2 = \frac{6.00}{21.543} = 0.2785\text{ m/s}$.
Downstream Specific Energy $E_2$:
$$E_2 = y_2 + \frac{V_2^2}{2g} = 3.282 + \frac{(0.2785)^2}{19.62} = 3.282 + 0.004 = 3.286\text{ m}$$
Energy Loss $\Delta E$:
$$\Delta E = E_1 – E_2 = 4.139 – 3.286 = 0.853\text{ m} \quad (\eta = 20.61\%)$$
8. Solved Numerical Example 3: Parabolic Drainage Channel Energy Dissipation
A parabolic highway stormwater chute characterized by top width equation $T(y) = 3.50 y^{1/2}$ conveys $Q = 8.50\text{ m}^3\text{/s}$. Flow enters the energy dissipator at $y_1 = 0.45\text{ m}$. Calculate incoming Froude number $F_1$, conjugate depth $y_2$, and required channel riprap sizing according to USACE criteria.
PARABOLIC CHANNEL PARAMETERS:
Q = 8.50 m3/s, T = 3.50 * y^0.5, y1 = 0.45 m
Step 1: Upstream Inflow Properties
Top width $T_1 = 3.50 \times (0.45)^{0.5} = 3.50 \times 0.6708 = 2.348\text{ m}$.
Area $A_1 = \frac{2}{3} T_1 y_1 = \frac{2}{3} \times 2.348 \times 0.45 = 0.7044\text{ m}^2$.
Hydraulic depth $D_1 = \frac{A_1}{T_1} = \frac{2}{3} y_1 = \frac{2}{3}(0.45) = 0.300\text{ m}$.
Velocity $V_1 = \frac{8.50}{0.7044} = 12.067\text{ m/s}$.
$$F_1 = \frac{V_1}{\sqrt{g D_1}} = \frac{12.067}{\sqrt{9.81 \times 0.300}} = \frac{12.067}{1.7155} = 7.034$$
Step 2: Parabolic Conjugate Depth ($y_2$)
$$Y = \frac{1}{2} \left( \sqrt{1 + 6.4 F_1^2} – 1 ight) = \frac{1}{2} \left( \sqrt{1 + 6.4(49.477)} – 1 ight) = \frac{1}{2} (\sqrt{1 + 316.65} – 1) = \frac{1}{2} (17.823 – 1) = 8.411$$
Subcritical conjugate depth $y_2$:
$$y_2 = 8.411 \times 0.45\text{ m} = 3.785\text{ m}$$
Step 3: Riprap Armor Sizing Downstream
Exit velocity $V_2 = \frac{Q}{A_2} = \frac{8.50}{\frac{2}{3}(3.50 \times \sqrt{3.785})(3.785)} = \frac{8.50}{17.18} = 0.495\text{ m/s}$.
Because $V_2 < 1.5\text{ m/s}$, standard Class II riprap ($D_{50} = 250\text{ mm}$) provides full protection against channel bed scour.
9. Channel Armoring, Riprap Sizing, and Sidewall Protection Standards
Protecting unlined or earthen canals downstream of a non-rectangular jump requires strict adherence to erosion standards:
-
FAO Irrigation and Drainage Paper 26: Recommends concrete or masonry lining extension for a distance $L_{prot} \ge 6 y_2$ downstream of the jump toe to prevent bank sloughing.
-
USACE EM 1110-2-1601 (Hydraulic Design of Flood Control Channels): Mandates stone riprap sizing based on local shear stress: $D_{50} = C \cdot y \cdot \left[ \frac{\gamma_w}{\gamma_s – \gamma_w} ight] S$, ensuring bank stability under cross-wave action.
Comprehensive Stilling Basin Scour and Tailwater Protection Guidelines
10. Non-Rectangular Jump Engineering Synthesis
Mastering the hydrodynamics of a hydraulic jump in non rectangular channels bridges fundamental momentum theory with real-world water resources engineering. By accounting for nonlinear stage-area relations, solving specific force equations, and anticipating cross-wave instabilities, civil engineers design durable, erosion-resistant canals and spillway transitions that withstand extreme flood discharges.
References & Standards Cited
-
Chow, V. T. (1959): Open-Channel Hydraulics, McGraw-Hill Civil Engineering Series, New York.
-
USACE (1994): Hydraulic Design of Flood Control Channels, Engineer Manual EM 1110-2-1601, U.S. Army Corps of Engineers, Washington, D.C. USACE Publications.
-
FAO (1975): Small Hydraulic Structures, FAO Irrigation and Drainage Paper 26/1 & 26/2, Food and Agriculture Organization of the United Nations, Rome.
-
Silvester, R. (1964): Hydraulic Jump in All Shapes of Horizontal Channels, Journal of the Hydraulics Division, ASCE, 90(1), 23-55. ASCE Library.
-
Hager, W. H., & Wanoschek, R. (1989): Hydraulic Jump in Triangular Channel, Journal of Hydraulic Research, 27(3), 395-408.
-
French, R. H. (1985): Open-Channel Hydraulics, McGraw-Hill Book Company, New York.
Frequently Asked Questions (FAQ)
The Belanger equation assumes a rectangular cross-section with constant top width $T$ and a hydrostatic force centroid at $y/2$. In non-rectangular channels, $T(y)$ and centroidal depth $bar{z}(y)$ vary nonlinearly with depth, invalidating the algebraic derivation.
The primary challenge is three-dimensional flow instability. The high-velocity central jet separates from sloping sidewalls, creating asymmetric horizontal eddies, intense diamond shock waves, and localized bank scouring.
The Froude number is defined using hydraulic depth $D = A / T$, such that $F = frac{V}{sqrt{g A / T}} = sqrt{frac{Q^2 T}{g A^3}}$, representing the ratio of flow velocity to gravity wave celerity.
Engineers install vertical training walls throughout the jump roller zone, incorporate flow-splitting central sills, or design gradual lateral wall flares ($1text{V}:4text{H}$) to enforce symmetric transverse expansion.
For the same incoming Froude number, a triangular channel jump exhibits lower relative energy loss ($Delta E / E_1$) than a rectangular jump because of the lateral containment and rapid depth amplification.
📚 References & Academic Bibliography
* **Chow, V. T. (1959):** *Open-Channel Hydraulics*, McGraw-Hill Civil Engineering Series, New York.
* **USACE (1994):** *Hydraulic Design of Flood Control Channels*, Engineer Manual EM 1110-2-1601, U.S. Army Corps of Engineers, Washington, D.C. [USACE Publications](https://www.publications.usace.army.mil).
* **FAO (1975):** *Small Hydraulic Structures*, FAO Irrigation and Drainage Paper 26/1 & 26/2, Food and Agriculture Organization of the United Nations, Rome.
* **Silvester, R. (1964):** *Hydraulic Jump in All Shapes of Horizontal Channels*, Journal of the Hydraulics Division, ASCE, 90(1), 23-55. [ASCE Library](https://www.asce.org).
* **Hager, W. H., & Wanoschek, R. (1989):** *Hydraulic Jump in Triangular Channel*, Journal of Hydraulic Research, 27(3), 395-408.
* **French, R. H. (1985):** *Open-Channel Hydraulics*, McGraw-Hill Book Company, New York.